***the flick valve shown in the image above is not included in this kit***
If you have a multi-group machine you may need to purchase more than one kit as this kit only contains the seals for two valves
the seals need to be greased as not all of them are water lubricated
this kit now includes a 7g tube (which is probably enough for 7 valves if you are wondering how much to use) of specialist food machinery grease Haynes (USA) Lubri-film plus, as the hardened steel bush is running against the truncated ball end stud
This kit contains:
4 x outlet seals
4 x plunger seals
2 x back end seals
2 x inlet seals
1 x 7g tube of Haynes Lubri-film plus (specialist food machinery grease)
If you have the new British flick valve all the seals are the same, except the outlet seals which i have not got around to getting yet, and there are only 2 needed, not 4
A word to the wise; expect the thread on the valve jumper to shear if you try to change the inlet seals, it wont always happen but it is relatively common. On this basis i would steer you towards ordering the valve jumper, which for the italian valve is here; https://londiniumespresso.com/store/index.php?route=product/product&product_id=270&search=valve+seal
I apologise for the lousy image, once we get the Vectis out the door this week and the new website launched i will have a lot more time to polish up the content in this website
