SUPPORT LOGIN

(Login and registration now occur through the store.)

LOGIN OR CREATE ACCOUNT



We're still experiencing some difficulties with our new unified login - sorry for the inconvenience!.

Seals question

More
1 year 3 months ago #15564 by Matt Pitts
Seals question was created by Matt Pitts
Hi Riess,

I've noticed that the grab point on my lever has become much more vertical than normal lately, so I'm getting much less volume is espresso.

Are you able to let me know if this is because I need to replace group / piston seals?

Thanks. Matt

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #15565 by Reiss Gunson
Replied by Reiss Gunson on topic Seals question
hi matt

yes, that is correct, it is time to replace the seals if the lever will not grab 45 degrees or more below vertical

if you are not aware there is a painstaking how to change the piston seals video in the permanent file of this forum

let me know if you have further questions

have a pleasant easter as you welcome spring

reiss.

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #15566 by Matt Pitts
Replied by Matt Pitts on topic Seals question
Thanks, Reiss,

I've ordered the seals and watched the videos, which were really helpful.

Thanks

Matt

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #15567 by Reiss Gunson
Replied by Reiss Gunson on topic Seals question
thank you matt.

Please Log in or Create an account to join the conversation.

Time to create page: 0.070 seconds
Powered by Support forum