its here;

https://londiniumespresso.com/forum/permanent-file/509-pdf-owners-manuals

please familiarise yourself with it

check that a 30mm length of silicone tubing has been fitted to one of the water level sensors in the bottom of the water tank - this ensures that the pump can never drain the tank and run dry

in particular note to prime the pump before fitting the water softening filter, and to soak the water filter inverted for 30 minutes to drive out the air before fitting

you only need to use the water filter if you have hard water and have decided to use it as your method of softening the water

turn the rotary pump off if there is not an audible change to a deeper tone, indicating that it has started pulling water, after 10 seconds of operation otherwise it is at risk of being damaged irrepairably

you will need to be a machine owner and be logged in to access this area

i still need to add some images, but the text is much improved

as always, if you have any questions please contact us